我們專業提供微型直流電動減速馬達,功率從5W~120W,輸出扭矩0.2Nm~250Nm, 2.9~1150r/min,可滿足各種不同的動力需求。電動減速馬達又可以稱為電動減速器,外形尺寸、制造成本大幅降低,維護成本也明顯減少,傳動質量卻顯著提高。它再不增大整體尺寸前提下,可以在很大的變速比范圍內使輸出轉速大大降低。軸承減速器和電動減速馬達于其他傳動裝置相比,擁有極其精巧緊湊的內部結構。電動減速馬達可以快速啟動和制動,也可以動態切換反轉,但比普通電動機轉動慣量要小得多。 直流無刷減速電機優點: a)電子換向來代替?zhèn)鹘y(tǒng)的機械換向,性能可靠、永無磨損、故障率低,壽命比有刷電機提高了約6倍,代表了電動車的發展方向; b)屬靜態電機,空載電流?。? c)效率高; d)體積小。 型號Type 減速比Ratio L mm * 空載轉速R.P.M. no load min-1 * 轉速R.P.M. S1 min-1 扭矩S1 Torque Nm * 轉速R.P.M. S2 min-1 扭矩S2 Torque Nm 最大轉速Max Torque Nm I max A MVSF 763 L 26 1/10 10.5 185 250 200 2 160 3.8 10 22 MVSF 763 L 26 1/20 21 185 124 100 3.70 82 7.20 14 22 MVSF 763 L 26 1/30 31 185 85 74 4.10 63 8.5 17 22 MVSF 763 L 26 1/40 39 185 64 50 4.50 38 9.2 19 22 Gear motor with worm screw and standard motor ? 63 12/24 Vdc 3000 RPM loadness 120W. Starting corrent 22 A. Driving shaft mounted with on 2 ball bearings Outlet shaft supported by two ball bearing with oil splash guard on outlet side. Is possible to have magnetic encoder 4 pulse for turne 2 channel. Connecting 2 wire 0,75 x 200 mm. *The rotation speed can change of ±10%. The S1 load test was made using a 5 A current in the air with an increase of temperature of 70°. The S2 test was made using 11,5 A current in the air with a 50% timing 5’ with an increase of temperature of 80° max. The starting current (I max) cannot be maintained for more than 2". Max forces wich may act on outlet shaft Axial 25 Kg, Radial 40 Kg. It is possible to apply an encoder.
我們專業提供微型直流電動減速馬達,功率從5W~120W,輸出扭矩0.2Nm~250Nm, 2.9~1150r/min,可滿足各種不同的動力需求。電動減速馬達又可以稱為電動減速器,外形尺寸、制造成本大幅降低,維護成本也明顯減少,傳動質量卻顯著提高。它再不增大整體尺寸前提下,可以在很大的變速比范圍內使輸出轉速大大降低。軸承減速器和電動減速馬達于其他傳動裝置相比,擁有極其精巧緊湊的內部結構。電動減速馬達可以快速啟動和制動,也可以動態切換反轉,但比普通電動機轉動慣量要小得多。 直流無刷減速電機優點: a)電子換向來代替?zhèn)鹘y(tǒng)的機械換向,性能可靠、永無磨損、故障率低,壽命比有刷電機提高了約6倍,代表了電動車的發展方向; b)屬靜態電機,空載電流?。? c)效率高; d)體積小。 型號Type 減速比Ratio L mm * 空載轉速R.P.M. no load min-1 * 轉速R.P.M. S1 min-1 扭矩S1 Torque Nm * 轉速R.P.M. S2 min-1 扭矩S2 Torque Nm 最大轉速Max Torque Nm I max A MVSF 763 L 26 1/10 10.5 185 250 200 2 160 3.8 10 22 MVSF 763 L 26 1/20 21 185 124 100 3.70 82 7.20 14 22 MVSF 763 L 26 1/30 31 185 85 74 4.10 63 8.5 17 22 MVSF 763 L 26 1/40 39 185 64 50 4.50 38 9.2 19 22 Gear motor with worm screw and standard motor ? 63 12/24 Vdc 3000 RPM loadness 120W. Starting corrent 22 A. Driving shaft mounted with on 2 ball bearings Outlet shaft supported by two ball bearing with oil splash guard on outlet side. Is possible to have magnetic encoder 4 pulse for turne 2 channel. Connecting 2 wire 0,75 x 200 mm. *The rotation speed can change of ±10%. The S1 load test was made using a 5 A current in the air with an increase of temperature of 70°. The S2 test was made using 11,5 A current in the air with a 50% timing 5’ with an increase of temperature of 80° max. The starting current (I max) cannot be maintained for more than 2". Max forces wich may act on outlet shaft Axial 25 Kg, Radial 40 Kg. It is possible to apply an encoder.